dmesg - 2013-03-10 12:32
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-xen-amd64 (Debian 2.6.32-41squeeze2) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Thu Mar 22 21:14:26 UTC 2012
[ 0.000000] Command line: placeholder root=/dev/mapper/debian-root ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] xen_release_chunk: looking at area pfn d0000-f3aff: 146175 pages freed
[ 0.000000] released 146175 pages of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000008f000 (usable)
[ 0.000000] Xen: 000000000008f000 - 0000000000090000 (reserved)
[ 0.000000] Xen: 0000000000090000 - 000000000009ec00 (usable)
[ 0.000000] Xen: 000000000009ec00 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 00000000cee98000 (usable)
[ 0.000000] Xen: 00000000cee98000 - 00000000ceebf000 (reserved)
[ 0.000000] Xen: 00000000ceebf000 - 00000000cef47000 (usable)
[ 0.000000] Xen: 00000000cef47000 - 00000000cefbf000 (ACPI NVS)
[ 0.000000] Xen: 00000000cefbf000 - 00000000ceff1000 (usable)
[ 0.000000] Xen: 00000000ceff1000 - 00000000cefff000 (ACPI data)
[ 0.000000] Xen: 00000000cefff000 - 00000000cf000000 (usable)
[ 0.000000] Xen: 00000000cf000000 - 00000000d0000000 (reserved)
[ 0.000000] Xen: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] Xen: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.5 present.
[ 0.000000] last_pfn = 0xcf000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cf000000
[ 0.000000] 0000000000 - 00cf000000 page 4k
[ 0.000000] kernel direct mapping tables up to cf000000 @ 100000-77d000
[ 0.000000] RAMDISK: 01708000 - 0332c800
[ 0.000000] ACPI: RSDP 00000000000f2130 00024 (v02 INTEL )
[ 0.000000] ACPI: XSDT 00000000ceffe120 0004C (v01 INTEL D525MW 00000045 01000013)
[ 0.000000] ACPI: FACP 00000000ceffd000 000F4 (v03 INTEL D525MW 00000045 MSFT 0100000D)
[ 0.000000] ACPI: DSDT 00000000ceff9000 03796 (v01 INTEL D525MW 00000045 MSFT 0100000D)
[ 0.000000] ACPI: FACS 00000000cef87000 00040
[ 0.000000] ACPI: APIC 00000000ceff8000 00084 (v02 INTEL D525MW 00000045 MSFT 0100000D)
[ 0.000000] ACPI: MCFG 00000000ceff7000 0003C (v01 INTEL D525MW 00000045 MSFT 0100000D)
[ 0.000000] ACPI: HPET 00000000ceff6000 00038 (v01 INTEL D525MW 00000045 MSFT 0100000D)
[ 0.000000] ACPI: SSDT 00000000ceff2000 0377C (v01 INTEL D525MW 00000045 MSFT 0100000D)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000000cf000000
[ 0.000000] Bootmem setup node 0 0000000000000000-00000000cf000000
[ 0.000000] NODE_DATA [0000000000008000 - 000000000000ffff]
[ 0.000000] bootmap [0000000000010000 - 0000000000029dff] pages 1a
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 00cf000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0003acc000 - 0003aed000] XEN PAGETABLES ==> [0003acc000 - 0003aed000]
[ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #3 [0001000000 - 00016e7b44] TEXT DATA BSS ==> [0001000000 - 00016e7b44]
[ 0.000000] #4 [0001708000 - 000332c800] RAMDISK ==> [0001708000 - 000332c800]
[ 0.000000] #5 [000332d000 - 0003acc000] XEN START INFO ==> [000332d000 - 0003acc000]
[ 0.000000] #6 [00016e8000 - 00016e819e] BRK ==> [00016e8000 - 00016e819e]
[ 0.000000] #7 [0000100000 - 0000759000] PGTABLE ==> [0000100000 - 0000759000]
[ 0.000000] found SMP MP-table at [ffff8800000fbe50] fbe50
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000008f
[ 0.000000] 0: 0x00000090 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000cee98
[ 0.000000] 0: 0x000ceebf -> 0x000cef47
[ 0.000000] 0: 0x000cefbf -> 0x000ceff1
[ 0.000000] 0: 0x000cefff -> 0x000cf000
[ 0.000000] On node 0 totalpages: 847600
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1628 pages reserved
[ 0.000000] DMA zone: 2313 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11536 pages used for memmap
[ 0.000000] DMA32 zone: 832067 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-0
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 256
[ 0.000000] PM: Registered nosave memory: 000000000008f000 - 0000000000090000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cee98000 - 00000000ceebf000
[ 0.000000] PM: Registered nosave memory: 00000000cef47000 - 00000000cefbf000
[ 0.000000] PM: Registered nosave memory: 00000000ceff1000 - 00000000cefff000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:28000000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.0.1 (preserve-AD) (dom0)
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880003b23000 s90328 r8192 d24360 u122880
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u122880 alloc=30*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] trying to map vcpu_info 0 at ffff880003b2e020, mfn 12bb2e, offset 32
[ 0.000000] cpu 0 using vcpu_info at ffff880003b2e020
[ 0.000000] trying to map vcpu_info 1 at ffff880003b4c020, mfn 12bb4c, offset 32
[ 0.000000] cpu 1 using vcpu_info at ffff880003b4c020
[ 0.000000] trying to map vcpu_info 2 at ffff880003b6a020, mfn 12bb6a, offset 32
[ 0.000000] cpu 2 using vcpu_info at ffff880003b6a020
[ 0.000000] trying to map vcpu_info 3 at ffff880003b88020, mfn 12bb88, offset 32
[ 0.000000] cpu 3 using vcpu_info at ffff880003b88020
[ 0.000000] Xen: using vcpu_info placement
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 834380
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: placeholder root=/dev/mapper/debian-root ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] DMA: Placing 64MB software IO TLB between ffff880006c87000 - ffff88000ac87000
[ 0.000000] DMA: software IO TLB at phys 0x6c87000 - 0xac87000
[ 0.000000] xen_swiotlb_fixup: buf=ffff880006c87000 size=67108864
[ 0.000000] xen_swiotlb_fixup: buf=ffff88000ace7000 size=32768
[ 0.000000] Memory: 3226624k/3391488k available (3152k kernel code, 1088k absent, 163776k reserved, 2064k data, 604k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:1280
[ 0.000000] xen: --> irq=0
[ 0.000000] xen: --> irq=1
[ 0.000000] xen: --> irq=2
[ 0.000000] xen: --> irq=3
[ 0.000000] xen: --> irq=4
[ 0.000000] xen: --> irq=5
[ 0.000000] xen: --> irq=6
[ 0.000000] xen: --> irq=7
[ 0.000000] xen: --> irq=8
[ 0.000000] xen: --> irq=9
[ 0.000000] xen: --> irq=10
[ 0.000000] xen: --> irq=11
[ 0.000000] xen: --> irq=12
[ 0.000000] xen: --> irq=13
[ 0.000000] xen: --> irq=14
[ 0.000000] xen: --> irq=15
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1
[ 0.000000] xen: registering gsi 9 triggering 0 polarity 0
[ 0.000000] xen_allocate_pirq: returning irq 9 for gsi 9
[ 0.000000] xen: --> irq=9
[ 0.000000] xen: acpi sci 9
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Xen: using vcpuop timer interface
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] alloc irq_desc for 1279 on node -1
[ 0.000000] alloc kstat_irqs on node -1
[ 0.000000] Detected 1800.121 MHz processor.
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.24 BogoMIPS (lpj=7200484)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.006579] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008148] Mount-cache hash table entries: 256
[ 0.008473] Initializing cgroup subsys ns
[ 0.008484] Initializing cgroup subsys cpuacct
[ 0.008495] Initializing cgroup subsys devices
[ 0.008502] Initializing cgroup subsys freezer
[ 0.008508] Initializing cgroup subsys net_cls
[ 0.008588] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.008596] CPU: L2 cache: 512K
[ 0.008605] CPU 0/0x0 -> Node 0
[ 0.008611] CPU: Physical Processor ID: 0
[ 0.008616] CPU: Processor Core ID: 0
[ 0.008626] mce: CPU supports 5 MCE banks
[ 0.008659] Performance Events: unsupported p6 CPU model 28 no PMU driver, software events only.
[ 0.008686] SMP alternatives: switching to UP code
[ 0.012000] ACPI: Core revision 20090903
[ 0.032174] alloc irq_desc for 1278 on node -1
[ 0.032182] alloc kstat_irqs on node -1
[ 0.032202] alloc irq_desc for 1277 on node -1
[ 0.032208] alloc kstat_irqs on node -1
[ 0.032221] alloc irq_desc for 1276 on node -1
[ 0.032226] alloc kstat_irqs on node -1
[ 0.032239] alloc irq_desc for 1275 on node -1
[ 0.032244] alloc kstat_irqs on node -1
[ 0.032763] installing Xen timer for CPU 1
[ 0.032775] alloc irq_desc for 1274 on node -1
[ 0.032781] alloc kstat_irqs on node -1
[ 0.032853] SMP alternatives: switching to SMP code
[ 0.036001] alloc irq_desc for 1273 on node -1
[ 0.036001] alloc kstat_irqs on node -1
[ 0.036028] alloc irq_desc for 1272 on node -1
[ 0.036034] alloc kstat_irqs on node -1
[ 0.036047] alloc irq_desc for 1271 on node -1
[ 0.036053] alloc kstat_irqs on node -1
[ 0.036067] alloc irq_desc for 1270 on node -1
[ 0.036073] alloc kstat_irqs on node -1
[ 0.004000] Initializing CPU#1
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.004000] CPU: L2 cache: 512K
[ 0.004000] CPU 1/0x0 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.036622] installing Xen timer for CPU 2
[ 0.036636] alloc irq_desc for 1269 on node -1
[ 0.036642] alloc kstat_irqs on node -1
[ 0.036717] alloc irq_desc for 1268 on node -1
[ 0.036723] alloc kstat_irqs on node -1
[ 0.036737] alloc irq_desc for 1267 on node -1
[ 0.036743] alloc kstat_irqs on node -1
[ 0.036763] alloc irq_desc for 1266 on node -1
[ 0.036769] alloc kstat_irqs on node -1
[ 0.036783] alloc irq_desc for 1265 on node -1
[ 0.036788] alloc kstat_irqs on node -1
[ 0.004000] Initializing CPU#2
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.004000] CPU: L2 cache: 512K
[ 0.004000] CPU 2/0x0 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.037197] installing Xen timer for CPU 3
[ 0.037209] alloc irq_desc for 1264 on node -1
[ 0.037215] alloc kstat_irqs on node -1
[ 0.037276] alloc irq_desc for 1263 on node -1
[ 0.037281] alloc kstat_irqs on node -1
[ 0.037296] alloc irq_desc for 1262 on node -1
[ 0.037301] alloc kstat_irqs on node -1
[ 0.037315] alloc irq_desc for 1261 on node -1
[ 0.037321] alloc kstat_irqs on node -1
[ 0.037334] alloc irq_desc for 1260 on node -1
[ 0.037340] alloc kstat_irqs on node -1
[ 0.004000] Initializing CPU#3
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.004000] CPU: L2 cache: 512K
[ 0.004000] CPU 3/0x0 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.037526] Brought up 4 CPUs
[ 0.037599] CPU0 attaching sched-domain:
[ 0.037607] domain 0: span 0-1 level SIBLING
[ 0.037615] groups: group ffff880003b32ae0 cpus 0 (cpu_power = 589) group ffff880003b50ae0 cpus 1 (cpu_power = 589)
[ 0.037638] domain 1: span 0-1 level MC
[ 0.037645] groups: group ffff880003b32bf0 cpus 0-1 (cpu_power = 1178)
[ 0.037661] domain 2: span 0-3 level CPU
[ 0.037668] groups: group ffff880003b32d00 cpus 0-1 (cpu_power = 1178) group ffff880003b6ed00 cpus 2-3 (cpu_power = 1178)
[ 0.037694] CPU1 attaching sched-domain:
[ 0.037701] domain 0: span 0-1 level SIBLING
[ 0.037709] groups: group ffff880003b50ae0 cpus 1 (cpu_power = 589) group ffff880003b32ae0 cpus 0 (cpu_power = 589)
[ 0.037736] domain 1: span 0-1 level MC
[ 0.037743] groups: group ffff880003b32bf0 cpus 0-1 (cpu_power = 1178)
[ 0.037758] domain 2: span 0-3 level CPU
[ 0.037766] groups: group ffff880003b32d00 cpus 0-1 (cpu_power = 1178) group ffff880003b6ed00 cpus 2-3 (cpu_power = 1178)
[ 0.037791] CPU2 attaching sched-domain:
[ 0.037797] domain 0: span 2-3 level SIBLING
[ 0.037805] groups: group ffff880003b6eae0 cpus 2 (cpu_power = 589) group ffff880003b8cae0 cpus 3 (cpu_power = 589)
[ 0.037827] domain 1: span 2-3 level MC
[ 0.037834] groups: group ffff880003b6ebf0 cpus 2-3 (cpu_power = 1178)
[ 0.037849] domain 2: span 0-3 level CPU
[ 0.037857] groups: group ffff880003b6ed00 cpus 2-3 (cpu_power = 1178) group ffff880003b32d00 cpus 0-1 (cpu_power = 1178)
[ 0.037882] CPU3 attaching sched-domain:
[ 0.037888] domain 0: span 2-3 level SIBLING
[ 0.037895] groups: group ffff880003b8cae0 cpus 3 (cpu_power = 589) group ffff880003b6eae0 cpus 2 (cpu_power = 589)
[ 0.037917] domain 1: span 2-3 level MC
[ 0.037924] groups: group ffff880003b6ebf0 cpus 2-3 (cpu_power = 1178)
[ 0.037940] domain 2: span 0-3 level CPU
[ 0.037947] groups: group ffff880003b6ed00 cpus 2-3 (cpu_power = 1178) group ffff880003b32d00 cpus 0-1 (cpu_power = 1178)
[ 0.038289] devtmpfs: initialized
[ 0.044428] Grant table initialized
[ 0.044428] regulator: core version 0.5
[ 0.044428] NET: Registered protocol family 16
[ 0.044428] alloc irq_desc for 1259 on node -1
[ 0.044428] alloc kstat_irqs on node -1
[ 0.044483] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.044483] ACPI: bus type pci registered
[ 0.044483] sync cpu 0 get result 1 max_id 3
[ 0.044483] sync cpu 1 get result 1 max_id 3
[ 0.044483] sync cpu 2 get result 1 max_id 3
[ 0.044483] sync cpu 3 get result 1 max_id 3
[ 0.044483] alloc irq_desc for 1258 on node -1
[ 0.044483] alloc kstat_irqs on node -1
[ 0.044647] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.044655] PCI: MCFG area at f8000000 reserved in E820
[ 0.078108] PCI: Using MMCONFIG at f8000000 - fbffffff
[ 0.078115] PCI: Using configuration type 1 for base access
[ 0.080070] bio: create slab at 0
[ 0.082649] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.082759] ACPI: EC: Look up EC in DSDT
[ 0.103045] ACPI: BIOS _OSI(Linux) query ignored
[ 0.104699] ACPI: Interpreter enabled
[ 0.104709] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.104815] ACPI: Using IOAPIC for interrupt routing
[ 0.118771] ACPI: No dock devices found.
[ 0.119286] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.119644] pci 0000:00:02.0: reg 10 32bit mmio: [0xe0300000-0xe037ffff]
[ 0.119663] pci 0000:00:02.0: reg 14 io port: [0x20c0-0x20c7]
[ 0.119681] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.119699] pci 0000:00:02.0: reg 1c 32bit mmio: [0xe0200000-0xe02fffff]
[ 0.120001] pci 0000:00:1b.0: reg 10 64bit mmio: [0xe0380000-0xe0383fff]
[ 0.120001] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.120001] pci 0000:00:1b.0: PME# disabled
[ 0.120001] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.120001] pci 0000:00:1c.0: PME# disabled
[ 0.120001] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.120001] pci 0000:00:1c.1: PME# disabled
[ 0.120001] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.120001] pci 0000:00:1c.2: PME# disabled
[ 0.120001] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.120001] pci 0000:00:1c.3: PME# disabled
[ 0.120001] pci 0000:00:1d.0: reg 20 io port: [0x2080-0x209f]
[ 0.120001] pci 0000:00:1d.1: reg 20 io port: [0x2060-0x207f]
[ 0.120001] pci 0000:00:1d.2: reg 20 io port: [0x2040-0x205f]
[ 0.120135] pci 0000:00:1d.3: reg 20 io port: [0x2020-0x203f]
[ 0.120306] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe0384400-0xe03847ff]
[ 0.120476] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.120491] pci 0000:00:1d.7: PME# disabled
[ 0.120883] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared
[ 0.121038] pci 0000:00:1f.2: reg 10 io port: [0x20b8-0x20bf]
[ 0.121059] pci 0000:00:1f.2: reg 14 io port: [0x20cc-0x20cf]
[ 0.121081] pci 0000:00:1f.2: reg 18 io port: [0x20b0-0x20b7]
[ 0.121101] pci 0000:00:1f.2: reg 1c io port: [0x20c8-0x20cb]
[ 0.121122] pci 0000:00:1f.2: reg 20 io port: [0x20a0-0x20af]
[ 0.121142] pci 0000:00:1f.2: reg 24 32bit mmio: [0xe0384000-0xe03843ff]
[ 0.121214] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.121227] pci 0000:00:1f.2: PME# disabled
[ 0.121353] pci 0000:00:1f.3: reg 20 io port: [0x2000-0x201f]
[ 0.121558] pci 0000:01:00.0: reg 10 io port: [0x1000-0x10ff]
[ 0.121615] pci 0000:01:00.0: reg 18 64bit mmio pref: [0xe0004000-0xe0004fff]
[ 0.121656] pci 0000:01:00.0: reg 20 64bit mmio pref: [0xe0000000-0xe0003fff]
[ 0.121782] pci 0000:01:00.0: supports D1 D2
[ 0.121789] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.121803] pci 0000:01:00.0: PME# disabled
[ 0.122021] pci 0000:00:1c.0: bridge io port: [0x1000-0x1fff]
[ 0.122050] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xe0000000-0xe00fffff]
[ 0.122225] pci 0000:02:00.0: reg 10 64bit mmio: [0xe0100000-0xe0101fff]
[ 0.122425] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.122441] pci 0000:02:00.0: PME# disabled
[ 0.122662] pci 0000:00:1c.1: bridge 32bit mmio: [0xe0100000-0xe01fffff]
[ 0.123129] pci 0000:00:1e.0: transparent bridge
[ 0.123241] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.123896] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 0.124312] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.124584] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.124834] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 0.125085] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.141925] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.142246] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.142563] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.142880] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.143207] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.143528] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.143846] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.144177] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.144415] xen_balloon: Initialising balloon driver with page order 0.
[ 0.144585] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.144620] vgaarb: loaded
[ 0.144697] PCI: Using ACPI for IRQ routing
[ 0.144697] Switching to clocksource xen
[ 0.147780] pnp: PnP ACPI init
[ 0.147825] ACPI: bus type pnp registered
[ 0.149579] xen: registering gsi 8 triggering 1 polarity 0
[ 0.149587] xen_allocate_pirq: returning irq 8 for gsi 8
[ 0.149593] xen: --> irq=8
[ 0.149716] xen: registering gsi 13 triggering 1 polarity 0
[ 0.149723] xen_allocate_pirq: returning irq 13 for gsi 13
[ 0.149728] xen: --> irq=13
[ 0.151105] xen: registering gsi 7 triggering 1 polarity 0
[ 0.151113] xen_allocate_pirq: returning irq 7 for gsi 7
[ 0.151118] xen: --> irq=7
[ 0.152139] xen: registering gsi 3 triggering 1 polarity 0
[ 0.152146] xen_allocate_pirq: returning irq 3 for gsi 3
[ 0.152152] xen: --> irq=3
[ 0.152993] xen: registering gsi 4 triggering 1 polarity 0
[ 0.153000] xen_allocate_pirq: returning irq 4 for gsi 4
[ 0.153008] xen: --> irq=4
[ 0.153754] pnp: PnP ACPI: found 13 devices
[ 0.153761] ACPI: ACPI bus type pnp unregistered
[ 0.153791] system 00:01: iomem range 0xf8000000-0xfbffffff has been reserved
[ 0.153800] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.153809] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.153818] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.153826] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.153836] system 00:01: iomem range 0xc0000-0xdffff could not be reserved
[ 0.153845] system 00:01: iomem range 0xe0000-0xfffff could not be reserved
[ 0.153854] system 00:01: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.153875] system 00:06: ioport range 0x500-0x53f has been reserved
[ 0.153884] system 00:06: ioport range 0x400-0x47f has been reserved
[ 0.153893] system 00:06: ioport range 0x680-0x6ff has been reserved
[ 0.153902] system 00:06: ioport range 0x295-0x296 has been reserved
[ 0.163293] PM-Timer failed consistency check (0x0xffffff) - aborting.
[ 0.163494] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[ 0.163506] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
[ 0.163523] pci 0000:00:1c.0: MEM window: 0xe0400000-0xe07fffff
[ 0.163538] pci 0000:00:1c.0: PREFETCH window: 0x000000e0000000-0x000000e00fffff
[ 0.163560] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 0.163571] pci 0000:00:1c.1: IO window: 0x3000-0x3fff
[ 0.163588] pci 0000:00:1c.1: MEM window: 0xe0100000-0xe01fffff
[ 0.163601] pci 0000:00:1c.1: PREFETCH window: 0x000000e0800000-0x000000e09fffff
[ 0.163622] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
[ 0.163633] pci 0000:00:1c.2: IO window: 0x4000-0x4fff
[ 0.163649] pci 0000:00:1c.2: MEM window: 0xe0a00000-0xe0bfffff
[ 0.163663] pci 0000:00:1c.2: PREFETCH window: 0x000000e0c00000-0x000000e0dfffff
[ 0.163683] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04
[ 0.163693] pci 0000:00:1c.3: IO window: 0x5000-0x5fff
[ 0.163710] pci 0000:00:1c.3: MEM window: 0xe0e00000-0xe0ffffff
[ 0.163723] pci 0000:00:1c.3: PREFETCH window: 0x000000e1000000-0x000000e11fffff
[ 0.163745] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.163750] pci 0000:00:1e.0: IO window: disabled
[ 0.163766] pci 0000:00:1e.0: MEM window: disabled
[ 0.163780] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.163824] xen: registering gsi 17 triggering 0 polarity 1
[ 0.163846] alloc irq_desc for 17 on node -1
[ 0.163861] alloc kstat_irqs on node -1
[ 0.163878] xen: --> irq=17
[ 0.163896] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.163913] pci 0000:00:1c.0: setting latency timer to 64
[ 0.163942] xen: registering gsi 16 triggering 0 polarity 1
[ 0.163956] alloc irq_desc for 16 on node -1
[ 0.163962] alloc kstat_irqs on node -1
[ 0.163970] xen: --> irq=16
[ 0.163981] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.163996] pci 0000:00:1c.1: setting latency timer to 64
[ 0.164025] pci 0000:00:1c.2: enabling device (0000 -> 0003)
[ 0.164036] xen: registering gsi 18 triggering 0 polarity 1
[ 0.164049] alloc irq_desc for 18 on node -1
[ 0.164055] alloc kstat_irqs on node -1
[ 0.164063] xen: --> irq=18
[ 0.164073] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.164092] pci 0000:00:1c.2: setting latency timer to 64
[ 0.164121] pci 0000:00:1c.3: enabling device (0000 -> 0003)
[ 0.164131] xen: registering gsi 19 triggering 0 polarity 1
[ 0.164144] alloc irq_desc for 19 on node -1
[ 0.164150] alloc kstat_irqs on node -1
[ 0.164158] xen: --> irq=19
[ 0.164169] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.164188] pci 0000:00:1c.3: setting latency timer to 64
[ 0.164216] pci 0000:00:1e.0: setting latency timer to 64
[ 0.164229] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.164236] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.164244] pci_bus 0000:01: resource 0 io: [0x1000-0x1fff]
[ 0.164251] pci_bus 0000:01: resource 1 mem: [0xe0400000-0xe07fffff]
[ 0.164258] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xe00fffff]
[ 0.164266] pci_bus 0000:02: resource 0 io: [0x3000-0x3fff]
[ 0.164273] pci_bus 0000:02: resource 1 mem: [0xe0100000-0xe01fffff]
[ 0.164280] pci_bus 0000:02: resource 2 pref mem [0xe0800000-0xe09fffff]
[ 0.164287] pci_bus 0000:03: resource 0 io: [0x4000-0x4fff]
[ 0.164294] pci_bus 0000:03: resource 1 mem: [0xe0a00000-0xe0bfffff]
[ 0.164301] pci_bus 0000:03: resource 2 pref mem [0xe0c00000-0xe0dfffff]
[ 0.164309] pci_bus 0000:04: resource 0 io: [0x5000-0x5fff]
[ 0.164316] pci_bus 0000:04: resource 1 mem: [0xe0e00000-0xe0ffffff]
[ 0.164323] pci_bus 0000:04: resource 2 pref mem [0xe1000000-0xe11fffff]
[ 0.164330] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.164337] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.164416] NET: Registered protocol family 2
[ 0.165203] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.170712] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.176104] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.176662] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.176671] TCP reno registered
[ 0.176912] NET: Registered protocol family 1
[ 0.176973] pci 0000:00:02.0: Boot video device
[ 0.209229] Unpacking initramfs...
[ 0.283429] Freeing initrd memory: 28818k freed
[ 0.304267] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.304280] DMA: Placing 64MB software IO TLB between ffff880006c87000 - ffff88000ac87000
[ 0.304287] DMA: software IO TLB at phys 0x6c87000 - 0xac87000
[ 0.305858] audit: initializing netlink socket (disabled)
[ 0.305885] type=2000 audit(1362643062.996:1): initialized
[ 0.311812] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.316249] VFS: Disk quotas dquot_6.5.2
[ 0.316408] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.316634] msgmni has been set to 6358
[ 0.317669] alg: No test for stdrng (krng)
[ 0.317856] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.317864] io scheduler noop registered
[ 0.317870] io scheduler anticipatory registered
[ 0.317875] io scheduler deadline registered
[ 0.318038] io scheduler cfq registered (default)
[ 0.318398] alloc irq_desc for 1257 on node -1
[ 0.318405] alloc kstat_irqs on node -1
[ 0.318473] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.318884] alloc irq_desc for 1256 on node -1
[ 0.318890] alloc kstat_irqs on node -1
[ 0.318947] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.319358] alloc irq_desc for 1255 on node -1
[ 0.319365] alloc kstat_irqs on node -1
[ 0.319421] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.319811] alloc irq_desc for 1254 on node -1
[ 0.319818] alloc kstat_irqs on node -1
[ 0.319874] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.334333] registering netback
[ 0.334562] alloc irq_desc for 1253 on node -1
[ 0.334570] alloc kstat_irqs on node -1
[ 0.338272] alloc irq_desc for 1252 on node -1
[ 0.338281] alloc kstat_irqs on node -1
[ 0.339048] hpet_acpi_add: no address or irqs in _CRS
[ 0.339085] Linux agpgart interface v0.103
[ 0.339143] agpgart-intel 0000:00:00.0: Intel IGD Chipset
[ 0.340246] agpgart-intel 0000:00:00.0: detected 8188K stolen memory
[ 0.351209] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.351572] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.351809] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.352456] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.352766] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.353170] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.353330] PNP: No PS/2 controller found. Probing ports directly.
[ 0.356244] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.356269] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.356614] mice: PS/2 mouse device common for all mice
[ 0.356776] rtc_cmos 00:03: RTC can wake from S4
[ 0.356904] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.356975] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 0.357010] cpuidle: using governor ladder
[ 0.357017] cpuidle: using governor menu
[ 0.357031] No iBFT detected.
[ 0.357700] TCP cubic registered
[ 0.358036] NET: Registered protocol family 10
[ 0.359772] Mobile IPv6
[ 0.359781] NET: Registered protocol family 17
[ 0.360080] PM: Resume from disk failed.
[ 0.360109] registered taskstats version 1
[ 0.361202] rtc_cmos 00:03: setting system clock to 2013-03-07 07:57:43 UTC (1362643063)
[ 0.361386] Initalizing network drop monitor service
[ 0.361585] Freeing unused kernel memory: 604k freed
[ 0.361862] Write protecting the kernel read-only data: 4340k
[ 0.451630] udev[83]: starting version 164
[ 0.596870] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.596934] xen: registering gsi 16 triggering 0 polarity 1
[ 0.596945] xen_allocate_pirq: returning irq 16 for gsi 16
[ 0.596952] xen: --> irq=16
[ 0.596965] Already setup the GSI :16
[ 0.596976] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.597109] r8169 0000:01:00.0: setting latency timer to 64
[ 0.597263] alloc irq_desc for 1251 on node -1
[ 0.597276] alloc kstat_irqs on node -1
[ 0.599262] r8169 0000:01:00.0: eth0: RTL8168e/8111e at 0xffffc900050c4000, 70:71:bc:bd:b8:56, XID 0c200000 IRQ 1251
[ 0.730527] usbcore: registered new interface driver usbfs
[ 0.730603] usbcore: registered new interface driver hub
[ 0.730814] usbcore: registered new device driver usb
[ 0.744545] SCSI subsystem initialized
[ 0.785992] libata version 3.00 loaded.
[ 0.795564] ata_piix 0000:00:1f.2: version 2.13
[ 0.795626] xen: registering gsi 18 triggering 0 polarity 1
[ 0.795637] xen_allocate_pirq: returning irq 18 for gsi 18
[ 0.795645] xen: --> irq=18
[ 0.795659] Already setup the GSI :18
[ 0.795671] ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.795696] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.801106] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.948094] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.948407] scsi0 : ata_piix
[ 0.948776] scsi1 : ata_piix
[ 0.949554] ata1: SATA max UDMA/133 cmd 0x20b8 ctl 0x20cc bmdma 0x20a0 irq 18
[ 0.949562] ata2: SATA max UDMA/133 cmd 0x20b0 ctl 0x20c8 bmdma 0x20a8 irq 18
[ 0.949702] xen: registering gsi 23 triggering 0 polarity 1
[ 0.949726] alloc irq_desc for 23 on node -1
[ 0.949738] alloc kstat_irqs on node -1
[ 0.949751] xen: --> irq=23
[ 0.949776] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.949850] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.949866] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.949963] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.950126] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.950176] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.954083] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.954145] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe0384400
[ 0.968059] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.968127] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.968135] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.968141] usb usb1: Product: EHCI Host Controller
[ 0.968147] usb usb1: Manufacturer: Linux 2.6.32-5-xen-amd64 ehci_hcd
[ 0.968153] usb usb1: SerialNumber: 0000:00:1d.7
[ 0.968366] usb usb1: configuration #1 chosen from 1 choice
[ 0.968448] hub 1-0:1.0: USB hub found
[ 0.968531] hub 1-0:1.0: 8 ports detected
[ 1.005889] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.006008] xen: registering gsi 23 triggering 0 polarity 1
[ 1.006016] xen_allocate_pirq: returning irq 23 for gsi 23
[ 1.006022] xen: --> irq=23
[ 1.006033] Already setup the GSI :23
[ 1.006041] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.006065] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.006077] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.006114] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.006181] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002080
[ 1.006367] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.006375] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.006382] usb usb2: Product: UHCI Host Controller
[ 1.006388] usb usb2: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd
[ 1.006394] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.006600] usb usb2: configuration #1 chosen from 1 choice
[ 1.006681] hub 2-0:1.0: USB hub found
[ 1.006721] hub 2-0:1.0: 2 ports detected
[ 1.006876] xen: registering gsi 19 triggering 0 polarity 1
[ 1.006883] xen_allocate_pirq: returning irq 19 for gsi 19
[ 1.006888] xen: --> irq=19
[ 1.006897] Already setup the GSI :19
[ 1.006905] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.006925] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.006935] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.006960] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.007062] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060
[ 1.007217] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.007224] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.007231] usb usb3: Product: UHCI Host Controller
[ 1.007237] usb usb3: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd
[ 1.007243] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.007436] usb usb3: configuration #1 chosen from 1 choice
[ 1.007517] hub 3-0:1.0: USB hub found
[ 1.007557] hub 3-0:1.0: 2 ports detected
[ 1.007702] xen: registering gsi 18 triggering 0 polarity 1
[ 1.007709] xen_allocate_pirq: returning irq 18 for gsi 18
[ 1.007715] xen: --> irq=18
[ 1.007723] Already setup the GSI :18
[ 1.007731] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.007751] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.007762] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.007791] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.007852] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040
[ 1.007999] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.008012] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.008018] usb usb4: Product: UHCI Host Controller
[ 1.008024] usb usb4: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd
[ 1.008025] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.008236] usb usb4: configuration #1 chosen from 1 choice
[ 1.008333] hub 4-0:1.0: USB hub found
[ 1.008376] hub 4-0:1.0: 2 ports detected
[ 1.008527] xen: registering gsi 16 triggering 0 polarity 1
[ 1.008536] xen_allocate_pirq: returning irq 16 for gsi 16
[ 1.008544] xen: --> irq=16
[ 1.008556] Already setup the GSI :16
[ 1.008567] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 1.008591] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.008602] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.008645] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.008746] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002020
[ 1.008911] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.008919] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.008926] usb usb5: Product: UHCI Host Controller
[ 1.008931] usb usb5: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd
[ 1.008937] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.009156] usb usb5: configuration #1 chosen from 1 choice
[ 1.009238] hub 5-0:1.0: USB hub found
[ 1.009283] hub 5-0:1.0: 2 ports detected
[ 1.121188] ata1.00: ATA-7: INTEL SSDSA2M040G2GC, 2CV102HD, max UDMA/133
[ 1.121201] ata1.00: 78165360 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.128633] ata1.00: configured for UDMA/133
[ 1.128963] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M040 2CV1 PQ: 0 ANSI: 5
[ 1.153006] sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 1.153429] sd 0:0:0:0: [sda] Write Protect is off
[ 1.153443] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.153642] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.154461] sda: sda1 sda2 < sda5 >
[ 1.156622] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.298901] device-mapper: uevent: version 1.0.3
[ 1.299479] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.534864] PM: Starting manual resume from disk
[ 1.534875] PM: Resume from partition 254:1
[ 1.534880] PM: Checking hibernation image.
[ 1.535328] PM: Error -22 checking image file
[ 1.535334] PM: Resume from disk failed.
[ 1.575934] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 1.575942] EXT3-fs: write access will be enabled during recovery.
[ 2.337801] kjournald starting. Commit interval 5 seconds
[ 2.337846] EXT3-fs: dm-0: orphan cleanup on readonly fs
[ 2.337861] ext3_orphan_cleanup: deleting unreferenced inode 1908747
[ 2.337916] ext3_orphan_cleanup: deleting unreferenced inode 1908746
[ 2.337936] ext3_orphan_cleanup: deleting unreferenced inode 1908745
[ 2.337954] ext3_orphan_cleanup: deleting unreferenced inode 1908744
[ 2.337971] ext3_orphan_cleanup: deleting unreferenced inode 1908738
[ 2.339148] ext3_orphan_cleanup: deleting unreferenced inode 450561
[ 2.339174] EXT3-fs: dm-0: 6 orphan inodes deleted
[ 2.339179] EXT3-fs: recovery complete.
[ 2.343524] EXT3-fs: mounted filesystem with ordered data mode.
[ 2.948335] udev[369]: starting version 164
[ 3.147281] ACPI Exception: AE_NOT_FOUND, Evaluating _PSS (20090903/processor_perflib-264)
[ 3.147652] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 3.147690] ACPI: Sleep Button [SLPB]
[ 3.163769] ACPI Exception: AE_NOT_FOUND, Evaluating _PSS (20090903/processor_perflib-264)
[ 3.164116] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 3.164139] ACPI: Power Button [PWRF]
[ 3.195696] ACPI Exception: AE_NOT_FOUND, Evaluating _PSS (20090903/processor_perflib-264)
[ 3.197238] ACPI Exception: AE_NOT_FOUND, Evaluating _PSS (20090903/processor_perflib-264)
[ 3.381965] cfg80211: Using static regulatory domain info
[ 3.381979] cfg80211: Regulatory domain: US
[ 3.381988] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3.382002] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 3.382013] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 3.382024] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 3.382035] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 3.382044] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 3.382055] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 3.382101] cfg80211: Calling CRDA for country: US
[ 3.389752] xen: registering gsi 19 triggering 0 polarity 1
[ 3.389765] xen_allocate_pirq: returning irq 19 for gsi 19
[ 3.389774] xen: --> irq=19
[ 3.389787] Already setup the GSI :19
[ 3.389798] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.390788] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 3.409169] parport_pc 00:08: reported by Plug and Play ACPI
[ 3.409306] parport0: PC-style at 0x378, irq 7 [PCSPP]
[ 3.489364] [drm] Initialized drm 1.1.0 20060810
[ 3.589375] xen: registering gsi 16 triggering 0 polarity 1
[ 3.589388] xen_allocate_pirq: returning irq 16 for gsi 16
[ 3.589396] xen: --> irq=16
[ 3.589409] Already setup the GSI :16
[ 3.589421] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.589441] pci 0000:00:02.0: setting latency timer to 64
[ 3.684590] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[ 3.684602] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[ 3.684894] xen: registering gsi 17 triggering 0 polarity 1
[ 3.684907] xen_allocate_pirq: returning irq 17 for gsi 17
[ 3.684916] xen: --> irq=17
[ 3.684931] Already setup the GSI :17
[ 3.684944] iwlagn 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.684971] iwlagn 0000:02:00.0: setting latency timer to 64
[ 3.685136] iwlagn 0000:02:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
[ 3.730551] iwlagn 0000:02:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
[ 3.730705] alloc irq_desc for 1250 on node -1
[ 3.730716] alloc kstat_irqs on node -1
[ 3.741335] alloc irq_desc for 1249 on node -1
[ 3.741350] alloc kstat_irqs on node -1
[ 3.741994] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.766073] xen: registering gsi 22 triggering 0 polarity 1
[ 3.766100] alloc irq_desc for 22 on node -1
[ 3.766112] alloc kstat_irqs on node -1
[ 3.766127] xen: --> irq=22
[ 3.766152] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 3.766307] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 3.772973] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 3.857370] hda_codec: ALC662 rev1: BIOS auto-probing.
[ 3.859762] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
[ 4.518099] EXT3 FS on dm-0, internal journal
[ 4.625738] loop: module loaded
[ 4.656918] coretemp coretemp.0: Using relative temperature scale!
[ 4.657864] coretemp coretemp.2: Using relative temperature scale!
[ 4.682114] w83627ehf: Found W83627DHG-P chip at 0x290
[ 4.862007] Adding 1626104k swap on /dev/mapper/debian-swap_1. Priority:-1 extents:1 across:1626104k
[ 5.819386] iwlagn 0000:02:00.0: firmware: requesting iwlwifi-4965-2.ucode
[ 5.843462] iwlagn 0000:02:00.0: loaded firmware version 228.61.2.24
[ 6.059649] Registered led device: iwl-phy0::radio
[ 6.059700] Registered led device: iwl-phy0::assoc
[ 6.059746] Registered led device: iwl-phy0::RX
[ 6.059817] Registered led device: iwl-phy0::TX
[ 6.114011] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 71.000708] Bridge firewalling registered
[ 71.014844] device eth0 entered promiscuous mode
[ 71.021926] r8169 0000:01:00.0: firmware: requesting rtl_nic/rtl8168e-2.fw
[ 71.032987] r8169 0000:01:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168e-2.fw (-2)
[ 71.052300] r8169 0000:01:00.0: eth0: link down
[ 71.052316] r8169 0000:01:00.0: eth0: link down
[ 71.053689] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 72.645434] r8169 0000:01:00.0: eth0: link up
[ 72.646699] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 72.647586] br0: port 1(eth0) entering learning state
[ 81.644026] br0: port 1(eth0) entering forwarding state
[ 82.056024] br0: no IPv6 routers present
[ 82.520140] RPC: Registered udp transport module.
[ 82.520149] RPC: Registered tcp transport module.
[ 82.520155] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 82.552036] Slow work thread pool: Starting up
[ 82.552301] Slow work thread pool: Ready
[ 82.552472] FS-Cache: Loaded
[ 82.594726] FS-Cache: Netfs 'nfs' registered for caching
[ 82.630290] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 82.988066] eth0: no IPv6 routers present
[ 83.735974] Event-channel device installed.
[ 83.908278] svc: failed to register lockdv1 RPC service (errno 97).
[ 83.917393] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 83.918203] NFSD: starting 90-second grace period
[ 85.419462] alloc irq_desc for 1248 on node -1
[ 85.419472] alloc kstat_irqs on node -1
[ 85.419594] alloc irq_desc for 1247 on node -1
[ 85.419601] alloc kstat_irqs on node -1
[ 85.420544] XENBUS: Unable to read cpu state
[ 85.421253] XENBUS: Unable to read cpu state
[ 85.421788] XENBUS: Unable to read cpu state
[ 85.422298] XENBUS: Unable to read cpu state
[ 92.421920] Ebtables v2.0 registered
[ 92.475110] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 92.531091] ip6_tables: (C) 2000-2006 Netfilter Core Team
[13057.447611] hrtimer: interrupt took 161507322 ns
[272746.713922] grub-probe: sending ioctl 1261 to a partition!
[272746.713932] grub-probe: sending ioctl 1261 to a partition!
[272747.033286] grub-probe: sending ioctl 1261 to a partition!
[272747.033296] grub-probe: sending ioctl 1261 to a partition!
[272747.218501] grub-probe: sending ioctl 1261 to a partition!
[272747.218512] grub-probe: sending ioctl 1261 to a partition!
[272747.248413] grub-probe: sending ioctl 1261 to a partition!
[272747.248422] grub-probe: sending ioctl 1261 to a partition!
[272747.490983] grub-probe: sending ioctl 1261 to a partition!
[272747.490993] grub-probe: sending ioctl 1261 to a partition!
[272751.748090] __ratelimit: 54 callbacks suppressed
[272751.748099] grub-probe: sending ioctl 1261 to a partition!
[272751.748106] grub-probe: sending ioctl 1261 to a partition!
[272751.802192] grub-probe: sending ioctl 1261 to a partition!
[272751.802201] grub-probe: sending ioctl 1261 to a partition!
[272752.000148] grub-probe: sending ioctl 1261 to a partition!
[272752.000159] grub-probe: sending ioctl 1261 to a partition!
[272752.025110] grub-probe: sending ioctl 1261 to a partition!
[272752.025119] grub-probe: sending ioctl 1261 to a partition!
[272752.205505] grub-probe: sending ioctl 1261 to a partition!
[272752.205515] grub-probe: sending ioctl 1261 to a partition!
[272754.389413] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[272754.393093] SGI XFS Quota Management subsystem
[272754.408319] JFS: nTxBlock = 8192, nTxLock = 65536
[272754.446328] NTFS driver 2.1.29 [Flags: R/W MODULE].
[272754.491188] QNX4 filesystem 0.2.3 registered.
[272754.542830] Btrfs loaded
[272757.477970] __ratelimit: 64 callbacks suppressed
[272757.477979] grub-probe: sending ioctl 1261 to a partition!
[272757.477987] grub-probe: sending ioctl 1261 to a partition!
[272757.508832] grub-probe: sending ioctl 1261 to a partition!
[272757.508842] grub-probe: sending ioctl 1261 to a partition!
[272757.710567] grub-probe: sending ioctl 1261 to a partition!
[272757.710577] grub-probe: sending ioctl 1261 to a partition!
[272757.744624] grub-probe: sending ioctl 1261 to a partition!
[272757.744634] grub-probe: sending ioctl 1261 to a partition!
[272757.985087] grub-probe: sending ioctl 1261 to a partition!
[272757.985097] grub-probe: sending ioctl 1261 to a partition!
[272762.496110] __ratelimit: 68 callbacks suppressed
[272762.496118] grub-probe: sending ioctl 1261 to a partition!
[272762.496126] grub-probe: sending ioctl 1261 to a partition!
[272762.541132] grub-probe: sending ioctl 1261 to a partition!
[272762.541142] grub-probe: sending ioctl 1261 to a partition!
[272762.927785] grub-probe: sending ioctl 1261 to a partition!
[272762.927794] grub-probe: sending ioctl 1261 to a partition!
[272762.944402] grub-probe: sending ioctl 1261 to a partition!
[272762.944412] grub-probe: sending ioctl 1261 to a partition!
[272763.142382] grub-probe: sending ioctl 1261 to a partition!
[272763.142392] grub-probe: sending ioctl 1261 to a partition!
[272795.770023] __ratelimit: 50 callbacks suppressed
[272795.770035] grub-probe: sending ioctl 1261 to a partition!
[272795.770046] grub-probe: sending ioctl 1261 to a partition!
[272796.033487] grub-probe: sending ioctl 1261 to a partition!
[272796.033497] grub-probe: sending ioctl 1261 to a partition!
[272796.234766] grub-probe: sending ioctl 1261 to a partition!
[272796.234776] grub-probe: sending ioctl 1261 to a partition!
[272796.252431] grub-probe: sending ioctl 1261 to a partition!
[272796.252441] grub-probe: sending ioctl 1261 to a partition!
[272796.490406] grub-probe: sending ioctl 1261 to a partition!
[272796.490416] grub-probe: sending ioctl 1261 to a partition!
[272800.955877] __ratelimit: 68 callbacks suppressed
[272800.955885] grub-probe: sending ioctl 1261 to a partition!
[272800.955893] grub-probe: sending ioctl 1261 to a partition!
[272800.985475] grub-probe: sending ioctl 1261 to a partition!
[272800.985486] grub-probe: sending ioctl 1261 to a partition!
[272801.372114] grub-probe: sending ioctl 1261 to a partition!
[272801.372124] grub-probe: sending ioctl 1261 to a partition!
[272801.388180] grub-probe: sending ioctl 1261 to a partition!
[272801.388190] grub-probe: sending ioctl 1261 to a partition!
[272801.585668] grub-probe: sending ioctl 1261 to a partition!
[272801.585678] grub-probe: sending ioctl 1261 to a partition!